Features

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality.

The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments.

The NTG-2 is powered with an internal 1.5V AA size battery or an external +48 Volt phantom power source. The output is a standard 3-pin XLR male connector.

The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen.

Battery Or Phantom Powered

The Rode NTG-2 can be powered with an internal 1.5V AA battery or external +48V phantom power source.

Super-Cardioid Polar Pattern

The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections.

Lightweight Durable Construction

The NTG-2 features a lightweight metal housing that is ideal for camera mounting.

Low Handling Noise

Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.

Specifications

In The Box

Rode NTG-2 Condenser Long Shotgun Microphone

• Microphone Stand Mount
• Windscreen
• Zippered Pouch

Overview

The BOYA BY-PVM1000 Professional Shotgun Microphone features a Line + Gradient pick up with the length of 27.8mm, features directional characteristics. The BY-PVM1000's high directivity, low noise and transparent audio reproduction make it a well suited microphone for Direct-coupled, balanced output ensures a clean signal even in high-output conditions Transformerless design for improved pickup of transients Switchable 80Hz high-pass filter.

Overview

New sealed windshield design

A new sealed windshield design further reduces wind noise, giving you crisp sound when shooting outdoors.

Auto power-on/off

When switching on your connected camcorder/DSLR, the Rode VideoMic Pro+ will detect plug-in power from the camera and automatically switch on. When your done recording and there is no longer any power on the cable then the microphone will automatically switch off.

Powered by either the included LB-1 Lithium-Ion rechargeable battery or 2x AA batteries

The Rode VideoMic Pro Plus includes a LB-1 Lithium-Ion rechargeable battery that can provide the mic with over 100 hours of power. While recording or when turned off the microphone's LB-1 battery can be charged via USB. If the included battery is not an option then you can power the mic with two AA batteries. A built-in battery door makes replacing batteries a breeze, and it won't get lost.

Audio safety channel

The audio safety channel makes use of both the left and right audio channels (available on most cameras), and reduces the right channel's sensitivity by 10db to help ensure the signal does not clip when unexpected spikes occur.

Rycote lyre suspension

The Rycote Lyre based shock mounting system separates the VideoMic Pro+ capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Removable connection. 3.5mm output port instead of a fixed cable

On the Rode VideoMic Pro Plus the 3.5mm jack cable is no longer fixed to the microphone, now if you want to use different length or mini jack cables you can simply plug it into the 3.5mm port on the rear of the microphone.

Two-stage high pass filter: 75hz and 150hz

A two-stage high pass filter option enables shooting clear audio in a variety of conditions. 75hz will reduce low frequencies such as rumble from traffic while 150hz will reduce sound from outside of the human frequency range.

Three stage gain +20db, -10db, 0db

20db, -10db, and 0db gain is selectable from a single button on the rear of the microphone. -10db will enable you to record loud subjects without clipping the audio, while +20db is designed to improve audio quality on DSLR or mirrorless cameras.

High frequency boost

High Frequency Boost will boost high frequencies enhancing detail and clarity in the recording.

Specifications

Overview

Rode VideoMic GO Lightweight On-Camera Microphone features: 

• High quality directional microphone
• No battery required
• Integrated Rycote® Lyre® shock mounting
• Our lightest mic at only 73g
• Rugged reinforced ABS construction
• Windshield included
• 3.5mm mini-jack output
• Integrated cold-shoe mount with 3/8” thread
• Two year warranty with online registration at www.rodemic.com/ warranty

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

The VideoMic GO is designed and made in Australia.

Specifications

In the Box

• Rode VideoMic GO Lightweight On-Camera Microphone
• Windshield

Features

Being a directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision.

The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness.

Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.

Specifications

In The Box

• Rode VideoMicro Compact On-Camera Microphone
• SC2 1/8" (3.5 mm) TRS Patch Cable
• WS9 Deluxe Windshield
• Lyre Shoe-Mount

Overview

Boya's BY-VM01 is a mini directional condenser microphone designed for recording high-quality audio while making videos. It designed for use with DSLRs, camcorder and video cameras with 3.5mm (diameter) stereo mini-pin jack – it fits into the compatible camera shoe, and connects to the camera via the 3.5mm mini-plug. The elastic mounting of the microphone bracket results in decoupling and isolates structure-borne sound – for example, it reduces vibration noise during autofocus.

Specifications

Overview

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

Features:

• Professional-Grade Wearable Microphone
• Designed for use with Smartphones and Tablets
• Connects via the RODE Rec for iOS or any other audio app
• Employs omni-directional condenser capsule
• Foam pop shield included

Details:

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDE’s RØDE Rec app for Apple iOS devices. RØDE Rec turns the user’s iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

Specifications

In the Box

• Rode SmartLav+ Lavalier Microphone for Smartphones
• LAV-CLIP Microphone Mounting Clip 
• WS-LAV Pop Filter/Wind Shield

Features

• Omnidirectional polar pattern
• Broadcast recording presentation and interview microphone
• “Tailored for voice” frequency response
• Ergonomic die-cast body
• Multi-layer mesh basket for wind protection
• Includes detachable microphone flag and zip case 

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.

Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.

The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.

It is supplied with a removable microphone ‘flag’ that can accommodate high-visibility branding.

The RØDE Reporter microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.

Specifications

In The Box

• Reporter Omnidirectional Interview Microphone 
• ZP2 Padded Zip Pouch (large) 
• Microphone Flag