Overview

This new generation 2.4GHz wireless microphone system has an easy-to-use, compact design. Designed for videographers on a limited budget and video hobbyists, it is ideal for interviews, run-and-gun video shoots, vlog productions, etc.

Boya's BY-WM4 Pro-K1 comprises  one body-pack transmitter (TX4 Pro), one portable receiver (RX4 Pro) and one omnidirectional lavalier/lapel microphone. A shoe mount adapter, 3.5mm to TRS and 3.5mm to TRRS output cables, and carrying case are also included.

With both TRS cable and TRRS output cable included, WM4 Pro can be used with smartphone, tablet, DSLR camera, camcorder, audio recorder computer and more. The system maintains the high signal-to-noise ratio above 84dB and low distortion rate below 0.05%. It works at distances of up to 60m (with line of sight) and, operating on the 2.4 GHz frequency band, offers flexibility and gives a low-latency audio transmission with no video sync issues.

Overview

The BOYA BY-PVM1000 Professional Shotgun Microphone features a Line + Gradient pick up with the length of 27.8mm, features directional characteristics. The BY-PVM1000's high directivity, low noise and transparent audio reproduction make it a well suited microphone for Direct-coupled, balanced output ensures a clean signal even in high-output conditions Transformerless design for improved pickup of transients Switchable 80Hz high-pass filter.

Features

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality.

The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments.

The NTG-2 is powered with an internal 1.5V AA size battery or an external +48 Volt phantom power source. The output is a standard 3-pin XLR male connector.

The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-2 is packaged with a microphone stand mount and windscreen.

Battery Or Phantom Powered

The Rode NTG-2 can be powered with an internal 1.5V AA battery or external +48V phantom power source.

Super-Cardioid Polar Pattern

The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections.

Lightweight Durable Construction

The NTG-2 features a lightweight metal housing that is ideal for camera mounting.

Low Handling Noise

Low noise output electronics provide high signal-to-noise ratio. The NTG-2 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.

Specifications

In The Box

Rode NTG-2 Condenser Long Shotgun Microphone

• Microphone Stand Mount
• Windscreen
• Zippered Pouch

Overview

The H6 Handy from Zoom is a portable handheld recorder and USB audio interface that features an interchangeable microphone system. The recorder ships with both XY and mid-side microphone modules, foam windscreen, 2GB SD card, four AA batteries, USB cable, Cubase LE and a hard carrying case. Optional module attachments can be purchased for expanded functionality. 

The H6 Handy allows for versatile recording techniques, giving you several options right out of the box. The included XYH-6 XY microphone module is made up of two matched unidirectional condenser microphones and is intended for capturing accurate, phase-correct stereo audio. The module allows you to adjust the angle of the two mics to either 90 degrees, or for a wider stereo image, 120 degrees. 

For situations that call for audio that allows for width control over your stereo image after it has been recorded, the XY module can be switched out for the MSH-6 mid-side stereo microphone module. Contrary to the appearance of the capsule, the mid-side module actually contains two elements positioned on top of one another: a unidirectional mic which faces forward (mid), and a bi-directional mic set perpendicular to it (side). In addition to providing you the ability to adjust the width of your stereo audio after it has been recorded, MS recording also provides true mono compatibility, a factor that comes into play in situations such as television production. 

In addition, the H6 is equipped with four XLR/TRS combo inputs for connecting external mic/line sources such as microphones or mixers. All four inputs and each of the mic modules are equipped with their own preamps with dedicated gain knobs that are easily accessible whether you have the unit mounted to your camera, or strapped over your shoulder. Also, each of the four combo inputs has its own -20dB pad. 

The recorder allows you to record up to six channels at once and stores them to SDXC memory cards up to 128GB in size. It also features a backup-record option that tracks a duplicate of the left and right channels with -12db input gain. This means that if you find that you have tracked your main audio too loud and that distortion has occurred in your audio, you will have a backup stereo mix with 12 db more headroom as a fail-safe. The unit also doubles as a 6-in/2-out USB audio interface and it can be used with your computer running the included Cubase LE or other DAW software.

Features

XYH-6 X/Y capsule also provides a secondary input for connecting an external mic or line level signal via stereo 1/8" mini jack

Optional wired controllers for remote transport controls

Optional hairy windscreen offers improved wind diffusion

Built-in speaker, located on the underside of the unit, for fast monophonic monitoring of the recorded signal without the need to make any connections

Interchangeable input capsules that can be swapped out as easily as the lens of a camera

Six-track simultaneous recording

Four mic/line inputs with XLR/TRS combo connectors

Physical gain control knobs and -20dB pads for each input

Phantom power for all main inputs: +12/+24/+48V

Records directly to SD, SDHC and SDXC cards up to 128GB

Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats

Auto-record, pre-record and backup-record functions

Multitrack to stereo internal mixdown

Independent monitor and playback mixes

Graphical VU meters

Voice memo and up to 99 marks per recording

Overdubbing, up to 99 takes

Built-in effects, including low-cut filtering, compression and limiting

Onboard MS decoding

Normalize, Divide and Trim editing

Chromatic tuner and metronome

Loop Playback with user-defined start and stop points

Variable playback speed, from 50% to 150%

Variable pitch per track without affecting playback speed

USB port for data exchange to and from computer

Multichannel and stereo USB audio interface for PC/Mac/iPad

Camera strap mounts

Mounts directly to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter

Accepts standard AA alkaline or NiMH rechargeable batteries

Over 20 hours of operation with 4 AA alkaline batteries

Large full-color angled LCD display that allows visibility whether mounted on a camera or strapped over shoulder

Specifications 

Overview

The RODE Wireless GO Compact Wireless Microphone System offers an extremely compact package, yet an all-in-one wireless microphone. The portable transmitter can operate as both a clip-on mic or the world’s smallest belt pack for a RODE lavalier, with high-quality, crystal clear broadcast-grade audio to the on-camera receiver.

Small Package, with a Powerful Result

The RODE Wireless GO Compact Wireless Microphone System consists of an extremely small transmitter and receiver, where both the microphone/transmitter (TX) and receiver (RX) weighs only 31g. The receiver provided features a stylish clip-on design or it can simply be used as the world’s smallest belt pack for a RODE lavalier microphone – making it the ideal system for run-and-gun journalists, content creation, vlogging, and even filmmaking.

Convenience in a Professional System

With the advanced system built-in to the portable RODE Wireless GO Compact Wireless Microphone System, makes it possible so that the transmitter and receiver auto-pairs within 3 seconds and transmits via RODE’s all-new Series III digital 2.4GHz transmission – specifically designed for a much shorter range operation in dense RF and Wi-Fi environments, and with line-of-sight – you can work within a range of up to 70m.

Ultra-Compact Wireless

The Wireless GO Receiver (RX) from RODE features a pretty sleek, dual-purpose design, making it possible to clip it onto a camera strap, your clothing, and to slide it easily into the camera’s shoe mount. Simply connect the receiver up to either your camera or recorder via the 3.5mm TRS output cable, and then adjust the output accordingly to your camera or recorder with the 3-stage gain control.

All-in-one Wireless System

As mentioned, the RODE Wireless GO Compact Wireless Microphone System provides a convenient system for content creators, with an extremely simple setup and not having to worry about any complicated technical setups. The transmitter easily allows you to clip it onto your blouse, shirt, jacket or tie – being ready for the GO.

Specifications 

In the Box

• Rode Wireless GO Compact Digital Wireless Microphone System (2.4 GHz)

Overview

Rode VideoMic GO Lightweight On-Camera Microphone features: 

• High quality directional microphone
• No battery required
• Integrated Rycote® Lyre® shock mounting
• Our lightest mic at only 73g
• Rugged reinforced ABS construction
• Windshield included
• 3.5mm mini-jack output
• Integrated cold-shoe mount with 3/8” thread
• Two year warranty with online registration at www.rodemic.com/ warranty

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

The VideoMic GO is designed and made in Australia.

Specifications

In the Box

• Rode VideoMic GO Lightweight On-Camera Microphone
• Windshield

Overview

New sealed windshield design

A new sealed windshield design further reduces wind noise, giving you crisp sound when shooting outdoors.

Auto power-on/off

When switching on your connected camcorder/DSLR, the Rode VideoMic Pro+ will detect plug-in power from the camera and automatically switch on. When your done recording and there is no longer any power on the cable then the microphone will automatically switch off.

Powered by either the included LB-1 Lithium-Ion rechargeable battery or 2x AA batteries

The Rode VideoMic Pro Plus includes a LB-1 Lithium-Ion rechargeable battery that can provide the mic with over 100 hours of power. While recording or when turned off the microphone's LB-1 battery can be charged via USB. If the included battery is not an option then you can power the mic with two AA batteries. A built-in battery door makes replacing batteries a breeze, and it won't get lost.

Audio safety channel

The audio safety channel makes use of both the left and right audio channels (available on most cameras), and reduces the right channel's sensitivity by 10db to help ensure the signal does not clip when unexpected spikes occur.

Rycote lyre suspension

The Rycote Lyre based shock mounting system separates the VideoMic Pro+ capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Removable connection. 3.5mm output port instead of a fixed cable

On the Rode VideoMic Pro Plus the 3.5mm jack cable is no longer fixed to the microphone, now if you want to use different length or mini jack cables you can simply plug it into the 3.5mm port on the rear of the microphone.

Two-stage high pass filter: 75hz and 150hz

A two-stage high pass filter option enables shooting clear audio in a variety of conditions. 75hz will reduce low frequencies such as rumble from traffic while 150hz will reduce sound from outside of the human frequency range.

Three stage gain +20db, -10db, 0db

20db, -10db, and 0db gain is selectable from a single button on the rear of the microphone. -10db will enable you to record loud subjects without clipping the audio, while +20db is designed to improve audio quality on DSLR or mirrorless cameras.

High frequency boost

High Frequency Boost will boost high frequencies enhancing detail and clarity in the recording.

Specifications