In the Box

• 1 x Quasar Science Q-LED T8 Dimmable Lamps
• 1 x P1Z Power Adapter

Overview

Lengths: 

•       Q5 - 7" 5 watts - 3,350 mAh LiOn Battery
•       Q10 - 12" 10 watt - 6,700 mAh LiOn Battery
•       Q20 - 24" 20 watt  - 13,400mAh LiOn Battery

Color Temp: 3000k/5600k
Press and hold the power button to alternate between color modes.

Dimming Levels: 100%, 75%, 50%, 25%, 10% OFF 
A single button press cycles through the dimming levels

Features:
Magnetic Feet
3/8" Threaded Receiver (Threaded Pin available here)
NEW Recessed Power Button
Kill switch to disable power button when traveling (V2)

Power:
Rechargeable Lithium Ion Battery
Charges from Mirco USB power adapter - V3.0  -9V @2A / 12V 1.5A
-(Will not charge on standard 5v USB Charger)
Battery Level Indicator

Runs for about 4 hours at full charge

To maximize battery life, the lamp can not operate while charging.

Color Rendering Index: 
95 CRI +
Flicker Free
25,000 + Hour Lifetime

Release Date: August 2017

Operation:
Press button once to turn on.
Press multiple times to dim.
Press and hold to change from 3000k to 5600k.

To disable the Power Button when traveling, using a pen, press and hold the the KILL button button on the side for 5 seconds.
To enable the Power Button after it has been killed, plug it into your charger.
To Reset the lamp to default settings of 5600k and 100%, press the RST button. 

In the Box

• 1 - Quasar Science Q-LED Lithium ion battery LED lamp tube

• 1 - Q-Lion QC 3.0 Charger with micro USB cable

• 1 - Instruction Card

Overview

The new Q-LED Rainbow Linear LED Lamp featuring RGBX can paint your world with vibrant saturated color and illuminate it with powerful white light from our 2000° Candlelight to 6000° Daylight Kelvin.

All Rainbow Lamps are equipped with onboard digital interface giving you command of Intensity, Kelvin, Hue & Saturation. Each lamp has a built in Lumen Radio CRMX chip for wireless control. The Rainbow can also be wired to DMX via Cat5 I/O Port.

The lamp is Self Ballasted AC input utilizing Neutrik True1 locking connector as well as locking Barrel connector for DC input.

Features

• X-fade White Light: Crossfading our Candlelight diode (2000k) and Daylight diode (6000k) mixing a balanced variable color spectrum. With independent 2000-6000° diodes we give a full range of high quality broad spectrum light and allow color saturation without the muddy effects of RGB derived white light. Includes Kelvin presets at 2000° (2800°) 3200° 4000° (5000°) 5600° 6000°

• RGB: A rainbow of color at your figure tips. With a full 360° palette for vibrant fully saturated color or mixed with X-fade white light for soft beautiful pastels. Includes color presets for Blue, Cyan, Green, Yellow, Orange, Red, Magenta, Purple.

• Low Profile Shape: Easy to hide when space is at a minimum, the slender linear lamps can be mounted tight against a wall or ceiling.

• Expandable and Scalable: Stack them in a column to create large LED panels of any size, or end to end for long linear lighting sources. Create geometric patterns and 3D structures or spell out words the options are endless.

• Control Panel: No need to pull out your phone or have a Wi-Fi network. The Rainbow comes equipped with an on-board control panel allowing you to set Intensity, CCT, Saturation, Hue, FX and much more.

• FX: Onboard effects with adjustable parameters. Including Fire, Police Light, Short Circuit, Paparazzi, Strobe and Rainbow Color Scroll.

• DMX Port: With DMX I/O, the Rainbow can be wired for DMX data control and passed through for chaining multiple lamps together.

• Wireless Control: Equipped standard with Lumen Radio CRMX wireless transceivers, Rainbow lamps can be controlled remotely via compatible transmitters.

• Lead / Follow Mode: Set a master lamp and control all others. Rainbow LED lamps can be set to send or receive commands to and from any other Rainbow making it easy to change the settings of any multi lamp fixture or rig without dialling each lamp.

• Energy Efficiency: The Rainbow Lamps vastly outperform traditional Quartz, Halogen and HMI lighting sources in luminous output to power consumption ratio.

• Self Ballasted AC Input: Run a line, RGB-X Rainbow Lamps use 100-265VAC (World Power) via Neutrik True1 connect and do not require troublesome external ballasts, power supplies or data boxes. 
   
• DC Battery option: Grab a battery, RGB-X Rainbow Lamps can run off of 10-26 VDC via locking 2.1mm x 5.5 barrel connector.

Length and Wattage: 

• 2' - 25 watt - Q25R
• 4' - 50 watt - Q50R
• 8' - 100 watt - Q100R

Power Connect & Voltage: 

• Self Ballasted AC range 100VAC to 265VAC via Neutrik True1 connect.
• DC range 10VDC to 26VDC via 5.5 x 2.1mm Locking Barrel connect.

Control:

• OLED screen with digital interface
• Wired DMX via Cat5/6
• Wireless DMX Control by Lumen Radio CRMX Wireless
  • Robust Industry Standard
  • Easy Pairing
  • Compatible with W-DMX Transmitters
• Manual Interface
• Lead/Follow Mode for operation from one tube to control multiple tubes

Specifications 

In the Box

• 1 - Quasar Science Q-LED - R - Rainbow Linear LED Lamps with RGBX tube
• 1 - Set of Q Boot-R (1 Power End, 1 Control End)
• 1 - 8' True 1 Power Connector Cable
• (Listings: UL, CB, KCC, JPN)
• 1 - Q-Upgrade USB Cable
• 1 - Instruction Card

Overview 

This is a Kino Flo 2' Kino 800ma KF55 True Match Fluorescent Lamp. The True Match Series of lamps has been produced to meet the high standards of both film and digital media. They are unique in their design since they are manufactured to synch with the precise spectral sensitivity of these media. Using this lamp negates the need of having to guess at the color temperature or scramble for the proper lighting filtration. The Safety Coating on this lamp serves to reduce scatter of glass in event of tube breakage.

For the last 20 years, Kino Flo has led the field in solving lighting issues for the film and video industry. Their high-output but cool fluorescent fixtures are now an industry standard on production stages around the world.

Note: High Output is the term to describe lamps that burn at a higher than Standard (std) lamp current. Normal lamps burn between 280-320ma. High Output lamps operate at or above 800ma. Anything above 1500ma is referred to as Very High Output.

Specifications

In the Box

1 Lamp

Overview

This is a Kino Flo 2' Kino 800ma KF32 SFC True Match Fluorescent Lamp. The True Match Series of lamps has been produced to meet the high standards of both film and digital media. They are unique in their design since they are manufactured to synch with the precise spectral sensitivity of these media. Using this lamp negates the need of having to guess at the color temperature or scramble for the proper lighting filtration. The Safety Coating on this lamp serves to reduce scatter of glass in event of tube breakage.

For the last 20 years, Kino Flo has led the field in solving lighting issues for the film and video industry. Their high-output but cool fluorescent fixtures are now an industry standard on production stages around the world.

Note: High Output is the term to describe lamps that burn at a higher than Standard (std) lamp current. Normal lamps burn between 280-320ma. High Output lamps operate at or above 800ma. Anything above 1500ma is referred to as Very High Output.

Specifications

In the Box

• 1x Lamp
  

Overview

This is a Kino Flo 4' Kino 800ma KF32 SFC True Match Fluorescent Lamp. The True Match Series of lamps has been produced to meet the high standards of both film and digital media. They are unique in their design since they are manufactured to synch with the precise spectral sensitivity of these media. Using this lamp negates the need of having to guess at the color temperature or scramble for the proper lighting filtration. The Safety Coating on this lamp serves to reduce scatter of glass in event of tube breakage.

For the last 20 years, Kino Flo has led the field in solving lighting issues for the film and video industry. Their high-output but cool fluorescent fixtures are now an industry standard on production stages around the world.

Note: High Output is the term to describe lamps that burn at a higher than Standard (std) lamp current. Normal lamps burn between 280-320ma. High Output lamps operate at or above 800ma. Anything above 1500ma is referred to as Very High Output.

Specifications

In the Box

• 1x Lamp
  

Overview

This is a Kino Flo 4' Kino 800ma KF55 SFC True Match Fluorescent Lamp. The True Match Series of lamps has been produced to meet the high standards of both film and digital media. They are unique in their design since they are manufactured to synch with the precise spectral sensitivity of these media. Using this lamp negates the need of having to guess at the color temperature or scramble for the proper lighting filtration. The Safety Coating on this lamp serves to reduce scatter of glass in event of tube breakage.

For the last 20 years, Kino Flo has led the field in solving lighting issues for the film and video industry. Their high-output but cool fluorescent fixtures are now an industry standard on production stages around the world.

Note: High Output is the term to describe lamps that burn at a higher than Standard (std) lamp current. Normal lamps burn between 280-320ma. High Output lamps operate at or above 800ma. Anything above 1500ma is referred to as Very High Output.

Specifications

In the Box

• 1x Lamp
  

Overview

QUALITY Blond Globes from DT Film Services in Durban. After two uses, this Blond Globe will not break like other cheaper version Blond Globes.

The P2/13 DXX 800w Tungsten Globe is suitable for use in 800w Open Face Linear fixtures, such as the Arrilite 800w, Ianiro and Strand Redheads.