Profoto continues to refine and surprise us with an enhanced version of the B1 battery-powered monolight, the B1X. The B1X 500 AirTTL 2-Light Location Kit includes two B1X flash heads with 80% brighter LED modeling lights and batteries with 50% greater capacity (325 full power flashes) and High-Speed Sync that's able to use the full 9-stop power range. Also included are an AC battery charger, a car charger, and a Backpack M to store and transport it all. All of the familiar professional and convenience features we've come to expect from Profoto are onboard. The B1X has the same dense, durable polymer housing, integrated 77-degree reflector, built-in receiver compatible with Air Remote TTL remotes, and intuitive highly visible controls and display.
AirTTL remotes are made for Nikon, Canon, Sony, and Olympus cameras. Busy photographers can literally set up their lights, slip the optional Air Remote TTL-C, TTL-N, TTL-S, or TTL-O remote onto their camera's hot shoe and point-and-shoot without taking a reading and testing. Composition, posing, etc. is of course up to the photographer, but time after time, the B1X will give you a first shot exposure that's a keeper.
The (separately purchased) remote is the key to this convenience and control. Operating on 2.4 GHz band width, the remote, really a controller, has 8 frequency channels and with 3 groups per channel and a range of up to 330' for TTL triggering and 1000' for normal non-TTL triggering. Each channel has power ratio capability of +/- 2 stops. If you prefer to use manual you have +/- 9 stops power variation. You've also got modeling light, unit shut-down and first or rear curtain control. The AirTTL remotes have mini-USB connectors for firmware updates directly from Profoto's website. The B1X's core performance features are equally impressive. The flash recycles in 0.1 to 1.9 seconds but can deliver up to 20 flashes per second in Quick Burst Mode which engages at lower power settings. Flash duration in Normal Mode is a very fast 1/1000 sec, but there's also a Freeze Mode that delivers flash durations as short as 1/19,000 sec for capturing liquid sprays or splashes and other creative effects.
The B1X is also capable of High Speed Sync. HSS is the technical term for syncing flash with shutter speeds shorter than the so-called x-sync, typically 1/250 of a second. It's a useful tool for controlling ambient light and for freezing action. Profoto uses a patent-pending technology that emits an extremely fast series of flash pulses. A simple button-press activates HSS Mode allowing you to shoot at shutter speeds as fast as 1/8000 of a second. The B1X 500 AirTTL employs an improved, high-capacity, exchangeable lithium-ion battery that gets up to 325 flashes on a 1.5-hour charge with the included 4.5A quick charger. The battery has fuel gauge-type LEDs that make monitoring remaining power easy. The B1X's modeling light is LED to put less strain on the battery. It provides the equivalent output of a 130W halogen bulb and will run for 120 minutes on a full charge.
Finally, B1X's back panel features a large, bright LCD screen that informs the user of the flash's power level, radio channel and group, sync choice, modeling light mode, and recycle alert. There's also a large battery gauge that literally can be read from 20' away.
The B1X 500 TTL comes with a protective cap, 4.5A charger, car charger, and a well-constructed backpack.
Lithium-Ion Battery for B1 and B1X AirTTL Flash Heads: Lithium-Ion Battery for B1 and B1X AirTTL Flash Heads from Profoto will give you up to 325 full-power flashes and thousands of minimum power flashes on a 2.5-hour charge from the 2.8A multi-voltage charger. The 4.5A quick charger shortens that time to 1.5 hours. Fuel-gauge-type LEDs on the battery and both the optional chargers allow you to monitor the charging progress.
Fast Battery Charger 4.5A for B1 500 AirTTL: The Fast Battery Charger 4.5A for B1 500 AirTTL from Profoto will charge the B1's Lithium-ion battery in 1 hour. The multi-voltage charger features LED indicators to easily monitor charge status.
Car Charger 1.8A for B1 500 AirTTL: The Car Charger 1.8A for B1 500 AirTTL from Profoto will charge the B1's Lithium-ion battery from a car's 12V (cigarette lighter) accessory outlet in 2 hours.
Backpack M for D1 Air or B1 AirTTL: Profoto's Backpack M for D1 Air or B1 AirTTL is a sturdy ballistic nylon pack with room for two B1 or D1 flash heads and accessories such as chargers, Air transmitters and expendables. The interior has padded compartments in gray nylon. Besides shoulder straps the pack has a top handle and exterior pockets for light stands.
|Maximum Watt/Seconds||500W/s +/- 1/20 Stop|
|Guide Number||291 @6.56' (2.0 m), 100 ISO with Magnum reflector|
|Display||LCD Indicators for:
Power in 1/10 stop increments
Battery charge level
Modeling light status
Recycle alert: Beep, Dim, Beep and Dim, silent
Sync: Slave, radio channel and group
Back panel control:
Modeling light button
Test, On/Off button
|Flash Variability||In 1/10 or 1 Stop increments 9.0 Stops:
2.0-10 power level (1/256-1/1)
|Recycle Time||Minimum/Maximum: 0.1-1.9 sec.
Quick Burst Mode: 20 frames per sec.
|Flash Duration||Normal mode (t0.5): 1/11,000 - 1/1,000 sec. min/max power
Freeze mode (0.05): 1/19,000 - 1/1,000 sec. min/max power
+/- 150K over entire power range, +/- 20K flash to flash
+/- 800K over entire power range, +/- 50K flash to flash
|Beam Angle||77 Degrees with built-in reflector and opal protective glass|
|Modeling Light||20W LED (70W tungsten equivalent)
Replaceable by service tech.
|Modeling Light Control||Off / Proportional / Free (full) 5.0-100%|
|Wireless Remote||Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio) Wireless range:
Up to 1,000' (300 m) for normal triggering
Up to 330' (100 m) for TTL with optional Air Remote TTL-C
|Frequency Band||2.4 GHz|
|Triggering||Air radio slaves, optical (IR), sync cord|
|Operating Voltage||100-240VAC, 50/60Hz, Self-sensing
14.8VDC/3Ah via included, rechargeable battery
|Auto Power Off||Yes, after 60 minutes of disuse
Sleep mode after 30 minutes of disuse
220 Full power flashes Battery life: 300 charge cycles (to 80% left)
|Flash Ready Indicator||Beep tone, ready right, modeling light dimming|
|Battery Charge Time||2.0 Hours with included 2.8V multi-voltage charger
1.0 Hour with optional 4.5V quick charger
|Battery Charge Display||Green LED indicators: 3 Sections: 100-70%
2 Sections: 70-40%
1 Section: 40-10%
1 Section blinking
|User Replaceable Flashtube||No, via authorized service tech.|
|Circuit Protection||Adaptive thermal control|
|Operating Temperature||14 to +122°F (-10 to +50°C)
Storage: 4 to +140°F (-20 to +60°C)
|Dimensions||Length x diameter:
Body only: 12.2 x 5.12 (310 x 130 mm)
With 5/8" (16 mm) stand adapter: 12.2 x 6.69" (310 x 170 mm)
|Weight||6.61 lb (6.0 kg) Including battery|
In the Box
- 2 x B1X 500 AirTTL Monolight
- 2 x Li-Ion Battery Mk II for B1 and B1X
- 1 x Battery Charger 4.5A
- 1 x Car Charger 1.8A
- 1 x Backpack M
- Limited Warrenty
1. FREE Standard Shipping
Free Economy Shipping is available on all orders exceeding R1,000. (T&C's apply)
*Terms and conditions to qualify for free shipping:
- Shipping may only be to a physical address within the borders of South Africa. No P.O Box's allowed.
- Shipping to outlying or remote areas like farms and game reserves may attract an additional fee.
- The delivery time to city areas is usually between 2 and 4 working days*. This excludes weekends and public holidays.
2. SWE Courier Service (local)
We use SWE couriers as our preferred method of delivery.
Your parcel is well packaged and handled with care while in transit.
Shipping charges are all depended on the following:
- Volumetric and Physical weight
- Courier Option
If Item is in stock, your item can be delievered between 1-2 Business Days - Main Cities are: Cape Town, Johannesburg, Pretoria, Durban, Port Elizabeth and East London. Other cities/towns will take more than 1-2 delivery time.
If Item is being collected from our suppliers, you item can be deeilevr between 2-7 Business Days - To all areas.
If the item has been pre-ordered for you, this can take anything from 4 - 8 weeks.
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed. This period does not include Saturdays, Sundays and public holidays.
3. UPS Courier Service (International)
International orders are generally subject to local import duties and taxes (VAT)
DT Film Services is not responsible for, nor can we offer, any specific advice regarding any customs related fees that you may incur. For specific information, please consult with your local government import office.
Privacy: Your privacy is important to us. We strive to exceed your expectations for privacy. Cross-border shipments are subject to inspection by customs authorities. We may also be called upon to provide certain order, shipment, and product information to our international carriers. Carriers may communicate such information to customs authorities for the purpose of facilitating customs clearance and compliance with local laws.
International shipments are quoted on a per order basis depending on the size and weight of the parcel shipped.
4. Collect from DT Film Services in Durban
You are welcome to place your order online, pay for it and collect it from our Durban branch. You will need to bring in a print out of the order for collection. Please ask for Louise in Sales on arrival.
DT Film Services - Durban
Open: Mon-Fri 8 to 5PM
5 Nunhead Road,