- IN THE BOX
- PLEASE CHECK STOCK AVAILABILITY
The HyperDeck Extreme Control will now cue and play the broadcast deck while recording on the HyperDeck. Often streaming services need 1080p24 masters. That’s easy as it’s possible to add an inline Teranex Express converter to de-interlace, up convert, aspect ratio convert and remove pulldown while editing.Control Up to 8 Broadcast Decks.
The top of the HyperDeck Extreme Control includes a row of 8 buttons for the recorder selection and a row of 8 buttons for the player selection. There’s a built in remote control router that makes multi deck work possible. The connections are all standard RS-422 control so each device can be plugged into one of 8 rear mounted RS-422 sockets. You can even use the 8 ports to control 8 HyperDecks. The RS-422 control has been tested to ensure compatibility with legacy broadcast decks such as the BVH-2000 series 1 inch C format machines, D2, Betacam SP and Digital Betacam broadcast decks.Familiar Broadcast VTR Style Design
The transport controls are a hybrid of controls from HyperDeck as well as traditional decks. You get buttons for rewind, fast forward, stop, play and record. To protect videotape masters, recording requires pressing both REC and PLAY. There's an eject button for ejecting cassettes, an input button for changing EE/PB modes plus a pre-roll button for cueing the tape.Traditional and Elegant Transport Controls
You get familiar transport controls, such as PLAY, which when pressed during a recording, will cause the recording to stop and then the deck will continue to play from the same point. To start a recording, press both the REC and PLAY button simultaneously. If you hold down the REC button while a HyperDeck is in record it will change cards. When either REW or F FWD is pressed, the deck will shuttle reverse or forward at the maximum rate. The search direction indicator will also show full speed shuttle. Available when used with HyperDeck, the SKIP REW and SKIP FWD buttons will move to the previous clip or the next clip in the recording.Premium Search Dial for Jog and Shuttle
The high quality search dial features both jog and shuttle plus an electronic clutch that stops the knob at the end of the shuttle travel or allows free spinning when in jog. HyperDeck Extreme Control replaces varispeed with a position function that allows rapid movement up and down the recording. The search dial uses twin bearings so you can free spin it for fast jog.Full Timecode Display and Deck Status
Full deck status is included and this includes a large easy to read timecode display. This display indicates the timecode of the current selected deck and the timecode source switch will control what’s displayed on the time counter. The horizontal light bar indicator allows the user to see the position of the search dial and provide a visual feedback, which is important when working with remote decks. The servo indicator light will show when the deck is in play or record mode and the servo system is correctly locked. Because remote decks will still display the time counter and transport state, the remote indicator will let you know if the deck is in remote. There’s even external video reference status.Flexible In and Out Point Entry for Editing
For editing, you need to enter an in and out point for the remote deck. Simply select the IN or OUT buttons and the ENTRY button simultaneously to enter the points. To display each edit point on the time counter display, simply press the IN or OUT buttons only and the time point will be shown. While the entry button is used for entering the in or out point data, you can also clear the in and out points by pressing the IN or OUT buttons while pressing DELETE. To trim edit points, you can press the TRIM + or - button while pressing the IN or OUT button, and you will advance or delay the edit point by 1 frame at each press.Pre-roll Edits to Cue Decks
For cueing decks a pre-roll button is included. When this button is pressed, the tape machine will run to the pre-roll point which is generally 5 seconds before the IN point. If you are using an older broadcast deck it could take a few minutes for the deck to get to the cue point as the machine has to spool the tape. Although a HyperDeck will cue instantly. If the PREROLL button is pressed when simultaneously pressing the IN or OUT point then the deck will cue to the IN or OUT point exactly. This feature is great for cueing to a specific location set via the IN or OUT points.Perform the Edit Automatically
Once you have your in and out points set, you can perform the edit automatically by pressing the EDIT button. If the EDIT button is pressed before setting the IN point, then the current tape position will be automatically entered as the IN point, and then the editing will be performed. This means you can select the edit button and it will set the IN point and then perform the edit all in one step.
- Standard Deck Controls for up to 8 Decks
- 8 x RS-422 Ports
- Supports Legacy Decks and HyperDeck 8K
- 3 RU, Half-Rack Width Installation
|Deck Control Outputs||8 x RS-422|
|Reference Input||Tri-Sync or Black Burst|
|Reference Output||Follows Reference Input|
|Computer Interface||1 x USB Type-C|
|Internal Software Upgrade||Loaded at System Start or via Blackmagic HyperDeck Setup Using USB Port|
|Operating System Support||
Mac 10.13 High Sierra, 10.14 Mojave, or later
Windows 8.1 or 10
|Display||8-Digit, 7-Segment LED Timecode Display|
1 x Internal 100 - 240 VAC
1 x 4-Pin XLR 12 VDC
|Operating Temperature||0 to 40°C|
|Storage Temperature||-20 to 60°C|
|Relative Humidity||0 to 90% Non-Condensing|
|Rack Compatibility||3 RU, Half Rack Width|
|Dimensions||21 x 13 x 35 cm|
- Blackmagic Design HyperDeck Extreme Control
- SD Card with User Manual
1. FREE Standard Shipping
Free Economy Shipping is available on all orders exceeding R1,000.(T's&C's apply)
*Terms and conditions to qualify for free shipping:
- Shipping may only be to a physical address within the borders of South Africa. No P.O Box's allowed.
- Shipping to outlying or remote areas like farms and game reserves may attract an additional fee.
- The delivery time to city areas is usually between 2 and 4 working days*. This excludes weekends and public holidays
2. SWE Courier Service (local)
We use SWE couriers as our preferred method of delivery.
Your parcel is well packaged and handled with care while in transit.
Shipping charges are all depended on the following:
- Volumetric and Physical weight
- Courier Option
If Item is in stock, your item can be delievered between 1-2 Business Days - Main Cities are: Cape Town, Johannesburg, Pretoria, Durban, Port Elizabeth and East London. Other cities/towns will take more than 1-2 delivery time.
If Item is being collected from our suppliers, you item can be deeilevr between 2-7 Business Days - To all areas.
If the item has been pre-ordered for you, this can take anything from 4 - 8 weeks.
*Reckoned from time of dispatch to time of arrival to client. This is an estimate and not guaranteed. This period does not include Saturdays, Sundays and public holidays.
3. UPS Courier Service (International) Please note:
International orders are generally subject to local import duties and taxes (VAT)
DT Film Services is not responsible for, nor can we offer, any specific advice regarding any customs related fees that you may incur. For specific information, please consult with your local government import office.
Privacy: Your privacy is important to us. We strive to exceed your expectations for privacy. Cross-border shipments are subject to inspection by customs authorities. We may also be called upon to provide certain order, shipment, and product information to our international carriers. Carriers may communicate such information to customs authorities for the purpose of facilitating customs clearance and compliance with local laws.
You are welcome to place your order online, pay for it and collect it from our Durban branch. You will need to bring in a print out of the order for collection. Please ask for Louise in Sales on arrival.
DT Film Services - Durban
Open: Mon-Fri 8 to 5PM
5 Nunhead Road
Stock is going in and out all the time, so to be 100% sure that we have an item available, please phone (031) 261-6961 or email email@example.com.